#! /path/to/executable/eggdrop # ^- This should contain a fully qualified path to your Eggdrop executable. # # $Id: eggdrop.conf,v 1.69 2011/09/23 20:31:32 thommey Exp $ # # This is a sample Eggdrop configuration file which includes all possible # settings that can be used to configure your bot. # # The pound signs (#) that you see at the beginning of some lines mean that # the remainder of that line is a comment, or just for your information. By # adding or deleting pound signs, you can comment or uncomment a setting, # respectively. # # Arguments for a command or setting may be inclosed in <>'s or []'s in the # example/description. Arguments in <>'s are required, while [] means optional. # # More detailed descriptions of all these settings can be found in # doc/settings/. ##### BASIC SETTINGS ##### # This setting defines the username the bot uses on IRC. This setting has # no effect if an ident daemon is running on your bot's machine. set username "Freedom" # This setting defines which contact person should be shown in .status, # /msg help, and other places. You really should include this information. set admin "Freedom " # This setting is used only for info to share with others on your botnet. # Set this to the IRC network your bot is connected to. set network "irc.swgemu.com" # This setting defines which timezone is your bot in. It's used for internal # routines as well as for logfile timestamping and scripting purposes. # The timezone string specifies the name of the timezone and must be three # or more alphabetic characters. For example, Central European Time(UTC+1) # should be "CET". set timezone "EST" # The offset setting specifies the time value to be added to the local # time to get Coordinated Universal Time (UTC aka GMT). The offset is # positive if the local timezone is west of the Prime Meridian and # negative if it is east. The value (in hours) must be between -23 and # 23. For example, if the timezone is UTC+1, the offset is -1. set offset "5" # If you don't want to use the timezone setting for scripting purposes only, # but instead everywhere possible, un-comment the following line. #set env(TZ) "$timezone$offset" # If you're using virtual hosting (your machine has more than 1 IP), you # may want to specify the particular IP to bind to. You can specify either # by hostname or by IP. You may also want to set the hostname here if # Eggdrop has trouble detecting it when it starts up. #set my-hostname "virtual.host.com" #set my-ip "79.133.201.66" # If you want to have your Eggdrop messages displayed in a language other # than English, change this setting to match your preference. An alternative # would be to set the environment variable EGG_LANG to that value. # # Languages included with Eggdrop: Danish, English, French, Finnish, German. #addlang "english" ##### LOG FILES ##### # Eggdrop is capable of logging various things, from channel chatter to # commands people use on the bot and file transfers. Logfiles are normally # kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday". # After 48 hours, they will be overwritten by the logfile of the next day. # # Events are logged by certain categories. This way, you can specify # exactly what kind of events you want sent to various logfiles. # # Logfile flags: # b - information about bot linking and userfile sharing # c - commands # d - misc debug information # h - raw share traffic # j - joins, parts, quits, and netsplits on the channel # k - kicks, bans, and mode changes on the channel # m - private msgs, notices and ctcps to the bot # o - misc info, errors, etc (IMPORTANT STUFF) # p - public text on the channel # r - raw incoming server traffic # s - server connects, disconnects, and notices # t - raw botnet traffic # v - raw outgoing server traffic # w - wallops (make sure the bot sets +w in init-server) # x - file transfers and file-area commands # # Note that modes d, h, r, t, and v can fill disk quotas quickly. There are # also eight user-defined levels (1-8) which can be used by Tcl scripts. # # Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p' # are logged to whatever channel they happened on. Most other events are # currently logged to every channel. You can make a logfile belong to all # channels by assigning it to channel "*". # This is the maximum number of logfiles allowed. This setting can be # increased; however, don't decrease it. set max-logs 5 # This is the maximum size of your logfiles. Set it to 0 to disable. # This value is in kilobytes, so '550' would mean cycle logs when it # reaches the size of 550 kilobytes. Note that this only works if you # have keep-all-logs 0 (OFF). set max-logsize 0 # This could be good if you have had problem with the logfile filling # your quota/hard disk or if you log +p and publish it to the web and # need more up-to-date info. Note that this setting might increase the # CPU usage of your bot (on the other hand it will decrease your mem usage). set quick-logs 0 # This setting allows you the logging of raw incoming server traffic via # console/log flag 'r', raw outgoing server traffic via console/log mode 'v', # raw botnet traffic via console/log mode 't', and raw share traffic via # console/log mode 'h'. These flags can create a large security hole, # allowing people to see user passwords. This is now restricted to +n users # only. Please choose your owners with care. set raw-log 0 # This creates a logfile named eggdrop.log containing private msgs/ctcps, # commands, errors, and misc. info from any channel. logfile mco * "logs/eggdrop.log" # This creates a logfile named lamest.log containing joins, parts, # netsplits, kicks, bans, mode changes, and public chat on the # channel #lamest. #logfile jpk #lamest "logs/lamest.log" # Use this feature to timestamp entries in the log file. set log-time 1 # Set the following to the timestamp for the logfile entries. Popular times # might be "[%H:%M]" (hour, min), or "[%H:%M:%S]" (hour, min, sec). # Read `man strftime' for more formatting options. Keep it below 32 chars. set timestamp-format {[%H:%M:%S]} # If you want to keep your logfiles forever, turn this setting on. All # logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]". # Note that your quota/hard-disk might be filled by this, so check your # logfiles often and download them. set keep-all-logs 0 # If keep-all-logs is 1, this setting will define the suffix of the logfiles. # The default will result in a suffix like "04May2000". "%Y%m%d" will produce # the often used yyyymmdd format. Read the strftime manpages for more options. # NOTE: On systems which don't support strftime, the default format will # be used _always_. set logfile-suffix ".%d%b%Y" # You can specify when Eggdrop should switch logfiles and start fresh. You # must use military time for this setting. 300 is the default, and describes # 03:00 (AM). set switch-logfiles-at 300 # "Writing user file..." and "Writing channel file..." messages won't be logged # anymore if this option is enabled. If you set it to 2, the "Backing up user # file..." and "Backing up channel file..." messages will also not be logged. # In addition to this, you can disable the "Switching logfiles..." and the new # date message at midnight, by setting this to 3. set quiet-save 0 ##### CONSOLE ##### # This is the default console mode. It uses the same event flags as the log # files do. The console channel is automatically set to your "primary" channel, # which is set in the modules section of the config file. Masters can change # their console channel and modes with the '.console' command. set console "mkcobxs" ##### FILES AND DIRECTORIES ##### # Specify here the filename your userfile should be saved as. set userfile "LamestBot.user" # Specify here the filename Eggdrop will save its pid to. If no pidfile is # specified, pid.(botnet-nick) will be used. #set pidfile "pid.LamestBot" # If you want your userfile to be sorted upon saving, enable this setting. # This causes the bot to use a bit more CPU when saving the userfile. set sort-users 0 # Specify here where Eggdrop should look for help files. Don't modify this # setting unless you know what you're doing! set help-path "help/" # Specify here where Eggdrop should look for text files. This is used for # certain Tcl and DCC commands. set text-path "text/" # Set here a place to store temporary files. set temp-path "/tmp" # The MOTD (Message Of The day) is displayed when people dcc chat or telnet # to the bot. Look at doc/TEXT-SUBSTITUTIONS for options. set motd "text/motd" # This banner will be displayed on telnet connections. Look at # doc/TEXT-SUBSTITUTIONS for options. set telnet-banner "text/banner" # This specifies what permissions the user, channel, and notes files should # be set to. The octal values are the same as for the chmod system command. # # To remind you: # # u g o u g o u g o # 0600 rw------- 0400 r-------- 0200 -w------- u - user # 0660 rw-rw---- 0440 r--r----- 0220 -w--w---- g - group # 0666 rw-rw-rw- 0444 r--r--r-- 0222 -w--w--w- o - others # # Note that the default 0600 is the most secure one and should only be changed # if you need your files for shell scripting or other external applications. set userfile-perm 0600 ##### BOTNET/DCC/TELNET ##### # Settings in this section should be unimportant for you until you deal # with botnets (multiple Eggdrops connected together to maximize efficiency). # You should read doc/BOTNET before modifying these settings. # If you want to use a different nickname on the botnet than you use on # IRC (i.e. if you're on an un-trusted botnet), un-comment the next line # and set it to the nick you would like to use. #set botnet-nick "LlamaBot" # This opens a telnet port by which you and other bots can interact with the # Eggdrop by telneting in. # # There are more options for the listen command in doc/tcl-commands.doc. Note # that if you are running more than one bot on the same machine, you will want # to space the telnet ports at LEAST 5 apart, although 10 is even better. # # Valid ports are typically anything between 1025 and 65535 assuming the # port is not already in use. # # If you would like the bot to listen for users and bots in separate ports, # use the following format: # # listen 3333 bots # listen 4444 users # # If you wish to use only one port, use this format: # # listen 3333 all # # You need to un-comment this line and change the port number in order to open # the listen port. You should not keep this set to 3333. listen 2547 all # This setting defines whether or not people can boot users on the Eggdrop # from other bots in your botnet. Valid settings are: # 0 - allow *no* outside boots # 1 - allow boots from sharebots # 2 - allow any boots set remote-boots 2 # This setting prohibits remote bots from telling your Eggdrop to unlink from # share bots. set share-unlinks 1 # This setting will drop telnet connections not matching a known host. set protect-telnet 0 # This setting will make the bot ignore DCC chat requests which appear to # have bogus information on the grounds that the user may have been trying # to make the bot connect to somewhere that will get it into trouble, or # that the user has a broken client, in which case the connect wouldn't work # anyway. set dcc-sanitycheck 0 # This settings defines a time in seconds that the bot should wait before # a dcc chat, telnet, or relay connection times out. set ident-timeout 5 # Define here whether or not a +o user still needs the +p flag to dcc the bot. set require-p 1 # If you want people allow to telnet in and type 'NEW' to become a new user, # set this to 1. This is similar to the 'hello' msg command. The protect-telnet # setting must be set to 0 to use this. set open-telnets 0 # If you don't want Eggdrop to identify itself as an eggdrop on a telnet # connection, set this setting to 1. Eggdrop will display 'Nickname' instead. set stealth-telnets 0 # If you want Eggdrop to display a banner when telneting in, set this setting # to 1. The telnet banner is set by 'set telnet-banner'. set use-telnet-banner 0 # This settings defines a time in seconds that the bot should wait before # a dcc chat, telnet, or relay connection times out. set connect-timeout 15 # Specify here the number of lines to accept from a user on the partyline # within 1 second before they are considered to be flooding and therefore # get booted. set dcc-flood-thr 3 # Define here how many telnet connection attempts in how many seconds from # the same host constitute a flood. The correct format is Attempts:Seconds. set telnet-flood 5:60 # If you want telnet-flood to apply even to +f users, set this setting to 1. set paranoid-telnet-flood 1 # Set here the amount of seconds before giving up on hostname/address # lookup (you might want to increase this if you are on a slow network). set resolve-timeout 7 ##### MORE ADVANCED SETTINGS ##### # Set this to your socks host if your Eggdrop sits behind a firewall. If # you use a Sun "telnet passthru" firewall, prefix the host with a '!'. #set firewall "!sun-barr.ebay:3666" # If you have a NAT firewall (you box has an IP in one of the following # ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255, # 10.0.0.0-10.255.255.255 and your firewall transparently changes your # address to a unique address for your box) or you have IP masquerading # between you and the rest of the world, and /dcc chat, /ctcp chat or # userfile sharing aren't working, enter your outside IP here. This IP # is used for transfers only, and has nothing to do with the my-ip or # my-hostname settings. You may still need to set my-ip and/or my-hostname. #set nat-ip "127.0.0.1" # If you want all dcc file transfers to use a particular portrange either # because you're behind a firewall, or for other security reasons, set it # here. #set reserved-portrange 2010:2020 # Set the time in minutes that temporary ignores should last. set ignore-time 15 # Define here what Eggdrop considers 'hourly'. All calls to it, including such # things as note notifying or userfile saving, are affected by this. # For example: # # set hourly-updates 15 # # The bot will save its userfile 15 minutes past every hour. set hourly-updates 00 # Un-comment the next line and set the list of owners of the bot. # You NEED to change this setting. set owner "Goldline" # Who should a note be sent to when new users are learned? set notify-newusers "$owner" # Enter the flags that all new users should get by default. See '.help whois' # on the partyline for a list of flags and their descriptions. set default-flags "hp" # Enter all user-defined fields that should be displayed in a '.whois'. # This will only be shown if the user has one of these extra fields. # You might prefer to comment this out and use the userinfo1.0.tcl script # which provides commands for changing all of these. set whois-fields "url birthday" # Enable this setting if you want your Eggdrop to die upon receiving a SIGHUP # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash. set die-on-sighup 0 # Enable this setting if you want your Eggdrop to die upon receiving a SIGTERM # kill signal. Otherwise, the Eggdrop will just save its userfile and rehash. set die-on-sigterm 1 # Uncomment these two lines if you wish to disable the .tcl and .set commands. # If you select your owners wisely, you should be okay enabling these. #unbind dcc n tcl *dcc:tcl #unbind dcc n set *dcc:set # If you enable this setting, only permanent owners (owner setting) will be # able to use .tcl and .set. Moreover, if you want only let permanent owners # use .dump, then set this to 2. # WARNING: setting this to 0 is a security risk, don't do it unless you trust # your owners enough to give them shell access to the account the bot is # running on. set must-be-owner 1 # Comment out this line to add the 'simul' partyline command (owners can # manipulate other people on the party line). Please select owners wisely # and use this command ethically! unbind dcc n simul *dcc:simul # Set here the maximum number of socket connections you will allow. You can # increase this later, but never decrease it below current usage. # If you're using Tcl threads, this is a per-thread maximum. set max-socks 100 # Enable this setting if you want +d & +k users to use commands bound as -|-. set allow-dk-cmds 1 # If your Eggdrop rejects bots that actually have already disconnected from # another hub, but the disconnect information has not yet spread over the # botnet due to lag, use this setting. The bot will wait dupwait-timeout # seconds before it checks again and then finally reject the bot. set dupwait-timeout 5 # Set this to 0 if you want the bot to strip '~+-^=' characters from user@hosts # before matching them. # This setting is currently kept for compatibility, but will be removed from # the next release. Please leave it set to 1 to avoid problems with your user # files in the future. set strict-host 1 # Enable cidr support for b/e/I modes. This means the bot will understand # and match modes in cidr notation, and will be able to put and enforce such # bans or unban itself, if banned with a cidr mask. # Do NOT set this, if your network/server does not support cidr! set cidr-support 0 # You MUST remove this line for your bot to start. This has been added to # prevent you from starting up a bot that is not fully configured. Bots # that have not been fully configured may join the wrong IRC network, the # wrong channels, or generally do things that you do not want. Please make # sure that you have double-checked every setting. There's also a similar line # lower down, just to make sure you're reading :) die "Please make sure you edit your config file completely." ##### MODULES ##### # Below are various settings for the modules included with Eggdrop. # PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at # Eggdrop, things change. # This path specifies the path were Eggdrop should look for its modules. # If you run the bot from the compilation directory, you will want to set # this to "". If you use 'make install' (like all good kiddies do ;), this # is a fine default. Otherwise, use your head :) set mod-path "modules/" #### BLOWFISH MODULE #### # IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER # Eggdrop encrypts its userfile, so users can have secure passwords. # Please note that when you change your encryption method later (i.e. # using other modules like a md5 module), you can't use your current # userfile anymore. Eggdrop will not start without an encryption module. loadmodule blowfish #### DNS MODULE #### # This module provides asynchronous dns support. This will avoid long # periods where the bot just hangs there, waiting for a hostname to # resolve, which will often let it timeout on all other connections. loadmodule dns # In case your bot has trouble finding dns servers or you want to use # specific ones, you can set them here. The value is a list of dns servers. # The order doesn't matter. You can also specify a non-standard port. # The default is to use the system specified dns servers. You don't need to # modify this setting normally. #set dns-servers "8.8.8.8 8.8.4.4" # Specify how long should the DNS module cache replies at maximum. The value # must be in seconds. # Note that it will respect the TTL of the reply and this is just an upper # boundary. set dns-cache 86400 # Specify how long should the DNS module cache negative replies (NXDOMAIN, # DNS Lookup failed). The value must be in seconds. set dns-negcache 600 # How many times should the DNS module resend the query for a given domain # if it receives no reply? set dns-maxsends 4 # Specify how long should the DNS module wait for a reply before resending the # query. The value must be in seconds. set dns-retrydelay 3 #### CHANNELS MODULE #### # This module provides channel related support for the bot. Without it, # you won't be able to make the bot join a channel or save channel # specific userfile information. loadmodule channels # Enter here the filename where dynamic channel settings are stored. set chanfile "LamestBot.chan" # Set this setting to 1 if you want your bot to expire bans/exempts/invites set # by other opped bots on the channel. set force-expire 0 # Set this setting to 1 if you want your bot to share user greets with other # bots on the channel if sharing user data. set share-greet 0 # Set this setting to 1 if you want to allow users to store an info line. set use-info 1 # Set this setting to 1 if you want to allow both +p and +s channel modes # to be enforced at the same time by the chanmode channel setting. # Make sure your server supports +ps mixing or you may get endless mode # floods. set allow-ps 0 # The following settings are used as default values when you .+chan #chan or .tcl # channel add #chan. Look below for explanation of every option. set global-flood-chan 15:60 set global-flood-deop 3:10 set global-flood-kick 3:10 set global-flood-join 5:60 set global-flood-ctcp 3:60 set global-flood-nick 5:60 set global-aop-delay 5:30 set global-idle-kick 0 set global-chanmode "nt" set global-stopnethack-mode 0 set global-revenge-mode 0 set global-ban-type 3 set global-ban-time 120 set global-exempt-time 60 set global-invite-time 60 set global-chanset { -autoop -autovoice -bitch +cycle +dontkickops +dynamicbans +dynamicexempts +dynamicinvites -enforcebans +greet -inactive -nodesynch -protectfriends +protectops -revenge -revengebot -secret -seen +shared -statuslog +userbans +userexempts +userinvites -protecthalfops -autohalfop -static } # chanmode +/- # This setting makes the bot enforce channel modes. It will always add # the + and remove the - modes. # # idle-kick 0 # This setting will make the bot check every minute for idle # users. Set this to 0 to disable idle check. # # stopnethack-mode 0 # This setting will make the bot de-op anyone who enters the channel # with serverops. There are seven different modes for this settings: # 0 turn off # 1 isoptest (allow serverop if registered op) # 2 wasoptest (allow serverop if op before split) # 3 allow serverop if isop or wasop # 4 allow serverop if isop and wasop. # 5 If the channel is -bitch, see stopnethack-mode 3 # If the channel is +bitch, see stopnethack-mode 1 # 6 If the channel is -bitch, see stopnethack-mode 2 # If the channel is +bitch, see stopnethack-mode 4 # # revenge-mode 0 # This settings defines how the bot should punish bad users when # revenging. There are four possible settings: # 0 Deop the user. # 1 Deop the user and give them the +d flag for the channel. # 2 Deop the user, give them the +d flag for the channel, and kick them. # 3 Deop the user, give them the +d flag for the channel, kick, and ban them. # # ban-type 3 # This setting defines what type of bans should eggdrop place for +k users or # when revenge-mode is 3. # Available types are: # 0 *!user@host # 1 *!*user@host # 2 *!*@host # 3 *!*user@*.host # 4 *!*@*.host # 5 nick!user@host # 6 nick!*user@host # 7 nick!*@host # 8 nick!*user@*.host # 9 nick!*@*.host # You can also specify types from 10 to 19 which correspond to types # 0 to 9, but instead of using a * wildcard to replace portions of the # host, only numbers in hostnames are replaced with the '?' wildcard. # Same is valid for types 20-29, but instead of '?', the '*' wildcard # will be used. # # ban-time 120 # Set here how long temporary bans will last (in minutes). If you # set this setting to 0, the bot will never remove them. # # exempt-time 60 # Set here how long temporary exempts will last (in minutes). If you # set this setting to 0, the bot will never remove them. The bot will # check the exempts every X minutes, but will not remove the exempt if # a ban is set on the channel that matches that exempt. Once the ban is # removed, then the exempt will be removed the next time the bot checks. # Please note that this is an IRCnet feature. # # invite-time 60 # Set here how long temporary invites will last (in minutes). If you # set this setting to 0, the bot will never remove them. The bot will # check the invites every X minutes, but will not remove the invite if # a channel is set to +i. Once the channel is -i then the invite will be # removed the next time the bot checks. Please note that this is an IRCnet # feature. # # aop-delay (minimum:maximum) # This is used for autoop, autohalfop, autovoice. If an op or voice joins a # channel while another op or voice is pending, the bot will attempt to put # both modes on one line. # aop-delay 0 No delay is used. # aop-delay X An X second delay is used. # aop-delay X:Y A random delay between X and Y is used. # # need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" } # This setting will make the bot run the script enclosed in brackets # if it does not have ops. This must be shorter than 120 characters. # If you use scripts like getops.tcl or botnetop.tcl, you don't need # to set this setting. # # need-invite { putserv "PRIVMSG #lamest :let me in!" } # This setting will make the bot run the script enclosed in brackets # if it needs an invite to the channel. This must be shorter than 120 # characters. If you use scripts like getops.tcl or botnetop.tcl, you # don't need to set this setting. # # need-key { putserv "PRIVMSG #lamest :let me in!" } # This setting will make the bot run the script enclosed in brackets # if it needs the key to the channel. This must be shorter than 120 # characters. If you use scripts like getops.tcl or botnetop.tcl, you # don't need to set this setting # # need-unban { putserv "PRIVMSG #lamest :let me in!" } # This setting will make the bot run the script enclosed in brackets # if it needs to be unbanned on the channel. This must be shorter than # 120 characters. If you use scripts like getops.tcl or botnetop.tcl, # you don't need to set this setting # # need-limit { putserv "PRIVMSG #lamest :let me in!" } # This setting will make the bot run the script enclosed in brackets # if it needs the limit to be raised on the channel. This must be # shorter than 120 characters. If you use scripts like getops.tcl or # botnetop.tcl, you don't need to set this setting # # flood-chan 15:60 # Set here how many channel messages in how many seconds from one # host constitutes a flood. Setting this to 0 or 0:0 disables # flood protection for the channel. # # flood-deop 3:10 # Set here how many deops in how many seconds from one host constitutes # a flood. Setting this to 0 or 0:0 disables deop flood protection for # the channel. # # flood-kick 3:10 # Set here how many kicks in how many seconds from one host constitutes # a flood. Setting this to 0 or 0:0 disables kick flood protection for # the channel. # # flood-join 5:60 # Set here how many joins in how many seconds from one host constitutes # a flood. Setting this to 0 or 0:0 disables join flood protection for # the channel. # # flood-ctcp 3:60 # Set here how many channel ctcps in how many seconds from one host # constitutes a flood. Setting this to 0 or 0:0 disables ctcp flood # protection for the channel. # # flood-nick 5:60 # Set here how many nick changes in how many seconds from one host # constitutes a flood. Setting this to 0 or 0:0 disables nick flood # protection for the channel. # # A complete list of all available channel settings: # # enforcebans # When a ban is set, kick people who are on the channel and match # the ban? # # dynamicbans # Only activate bans on the channel when necessary? This keeps # the channel's ban list from getting excessively long. The bot # still remembers every ban, but it only activates a ban on the # channel when it sees someone join who matches that ban. # # userbans # Allow bans to be made by users directly? If turned off, the bot # will require all bans to be made through the bot's console. # # dynamicexempts # Only activate exempts on the channel when necessary? This keeps # the channel's exempt list from getting excessively long. The bot # still remembers every exempt, but it only activates a exempt on # the channel when it sees a ban set that matches the exempt. The # exempt remains active on the channel for as long as the ban is # still active. # # userexempts # Allow exempts to be made by users directly? If turned off, the # bot will require all exempts to be made through the bot's console. # # dynamicinvites # Only activate invites on the channel when necessary? This keeps # the channel's invite list from getting excessively long. The bot # still remembers every invite, but the invites are only activated # when the channel is set to invite only and a user joins after # requesting an invite. Once set, the invite remains until the # channel goes to -i. # # userinvites # Allow invites to be made by users directly? If turned off, the # bot will require all invites to be made through the bot's console. # # autoop # Op users with the +o flag as soon as they join the channel? # This is insecure and not recommended. # # autohalfop # Halfop users with the +l flag as soon as they join the channel? # This is insecure and not recommended. # # bitch # Only let users with +o) flag be opped on the channel? # # greet # Say a user's info line when they join the channel? # # protectops # Re-op a user with the +o flag if they get deopped? # # protecthalfops # Re-halfop a user with the +l flag if they get dehalfopped? # # protectfriends # Re-op a user with the +f flag if they get deopped? # # statuslog # Log the channel status line every 5 minutes? This shows the bot's # status on the channel (op, voice, etc.), the channel's modes, and # the total number of members, ops, voices, regular users, and +b, # +e, and +I modes on the channel. A sample status line follows: # # [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7] # # revenge # Remember people who deop/kick/ban the bot, valid ops, or friends # and punish them? Users with the +f flag are exempt from revenge. # # revengebot # This is similar to to the 'revenge' option, but it only triggers # if a bot gets deopped, kicked or banned. # # autovoice # Voice users with the +v flag when they join the channel? # # secret # Prevent this channel from being listed on the botnet? # # shared # Share channel-related user info for this channel? # # cycle # Cycle the channel when it has no ops? # # dontkickops # Do you want the bot not to be able to kick users who have the +o # flag, letting them kick-flood for instance to protect the channel # against clone attacks. # # inactive # This prevents the bot from joining the channel (or makes it leave # the channel if it is already there). It can be useful to make the # bot leave a channel without losing its settings, channel-specific # user flags, channel bans, and without affecting sharing. # # seen # Respond to seen requests in the channel? The seen module must be # loaded for this to work. # # nodesynch # Allow non-ops to perform channel modes? This can stop the bot from # fighting with services such as ChanServ, or from kicking IRCops when # setting channel modes without having ops. # # static # Allow only permanent owners to remove the channel? # To add a channel to eggdrop, please enter the bot's partyline and type # .+chan #channel. Check also .help chanset and .help chaninfo. # You can still add a channel here and it will be saved if you have a # chanfile. We recommend you to use the partyline though. # #channel add #freedom #### SERVER MODULE #### # This module provides the core server support. You have to load this # if you want your bot to come on IRC. Not loading this is equivalent # to the old NO_IRC define. loadmodule server # What is your network? # 0 = EFnet # 1 = IRCnet # 2 = Undernet # 3 = DALnet # 4 = +e/+I/max-modes 20 Hybrid # 5 = Others set net-type 5 # Set the nick the bot uses on IRC, and on the botnet unless you specify a # separate botnet-nick, here. set nick "Freedom" # Set the alternative nick which the bot uses on IRC if the nick specified # by 'set nick' is unavailable. All '?' characters will be replaced by random # numbers. set altnick "Freedom" # Set what should be displayed in the real-name field for the bot on IRC. # This can not be blank, it has to contain something. set realname "/msg Freedom hello" # This is a Tcl script to be run immediately after connecting to a server. bind evnt - init-server evnt:init_server proc evnt:init_server {type} { global botnick putquick "MODE $botnick +i-ws" } # Set the default port which should be used if none is specified with # '.jump' or in 'set servers'. set default-port 6667 # This is the bot's server list. The bot will start at the first server listed, # and cycle through them whenever it gets disconnected. You need to change these # servers to YOUR network's servers. # # The format is: # server[:port[:password]] # # Both the port and password fields are optional; however, if you want to set a # password you must also set a port. If a port isn't specified it will default to # your default-port setting. set servers { irc.swgemu.com } # Number of seconds to wait between transmitting queued lines to the server. # Lower this value at your own risk. ircd is known to start flood control # at 512 bytes/2 seconds. set msg-rate 2 # This setting makes the bot try to get his original nickname back if its # primary nickname is already in use. set keep-nick 1 # This setting makes the bot squelch the error message when rejecting a DCC # CHAT, SEND or message command. Normally, Eggdrop notifies the user that the # command has been rejected because they don't have access. Note that sometimes # IRC server operators detect bots that way. set quiet-reject 1 # If you want your bot to answer lower case ctcp requests (non rfc- # compliant), set this setting to 1. mIRC will do this, most other # clients will not. set lowercase-ctcp 0 # Set how many ctcps should be answered at once. set answer-ctcp 3 # Set here how many msgs in how many seconds from one host constitutes # a flood. If you set this to 0:0, msg flood protection will be disabled. set flood-msg 5:60 # Set here how many ctcps in how many seconds from one host constitutes # a flood. If you set this to 0:0, ctcp flood protection will be disabled. set flood-ctcp 3:60 # This settings makes the bot cycle forever through the server list until # it successfully connects to one. set never-give-up 1 # This setting defines how long Eggdrop should wait before moving from one # server to another on disconnect. If you set 0 here, Eggdrop will not wait # at all and will connect instantly. Setting this too low could result in # your bot being K:Lined. set server-cycle-wait 60 # Set here how long Eggdrop should wait for a response when connecting to a # server before giving up and moving on to next server. set server-timeout 60 # If the number of servers on the net gets below this number, the bot # will jump to a new server (it will assume it's on the losing end of # a netsplit). Set this to 0 to turn off. If your bot is running on # any major IRC network, this should probably be turned off. set servlimit 0 # Set this to 1 if Eggdrop should check for stoned servers? (where the # server connection has died, but Eggdrop hasn't been notified yet). set check-stoned 1 # If you want your bot to exit the server if it receives an ERROR message, # set this to 1. set serverror-quit 1 # Set here the maximum number of lines to queue to the server. If you're # going to dump large chunks of text to people over IRC, you will probably # want to raise this. 300 is fine for most people though. set max-queue-msg 300 # If you want Eggdrop to trigger binds for ignored users, set this to 1. set trigger-on-ignore 0 # This setting configures PUBM and MSGM binds to be exclusive of PUB and MSG # binds. This means if a MSGM bind with the mask "*help*" exists and is # triggered, any MSG bindings with "help" in their mask will not be # triggered. Don't enable this unless you know what you are doing! set exclusive-binds 0 # Allow identical messages in the mode queue? set double-mode 1 # Allow identical messages in the server queue? set double-server 1 # Allow identical messages in the help queue? set double-help 1 # This optimizes the kick queue. It also traces nick changes and parts in # the channel and changes the kick queue accordingly. There are three # different options for this setting: # 0 = Turn it off. # 1 = Optimize the kick queue by summarizing kicks. # 2 = Trace nick changes and parts on the channel and change the queue # accordingly. For example, bot will not try to kick users who have # already parted the channel. # ATTENTION: Setting 2 is very CPU intensive. set optimize-kicks 1 # If your network supports more recipients per command then 1, you can # change this behavior here. Set this to the number of recipients per # command, or set this to 0 for unlimited. set stack-limit 4 ### SERVER MODULE - OTHER NETWORKS (net-type 5) ### # This settings defines how umode +r is understood by Eggdrop. Some networks # use +r to indicate a restricted connection. If this is your case, and you # want your bot to leave restricted servers and jump to the next server on its # list, then set it to 1. #set check-mode-r 1 # This setting allows you to specify the maximum nick-length supported by your # network. The default setting is 9. The maximum supported length by Eggdrop # is 32. #set nick-len 9 #### CTCP MODULE #### # This module provides the normal ctcp replies that you'd expect. # Without it loaded, CTCP CHAT will not work. The server module # is required for this module to function. loadmodule ctcp # Set here how the ctcp module should answer ctcps. There are 3 possible # operating modes: # 0: Normal behavior is used. # 1: The bot ignores all ctcps, except for CHAT and PING requests # by users with the +o flag. # 2: Normal behavior is used, however the bot will not answer more # than X ctcps in Y seconds (defined by 'set flood-ctcp'). set ctcp-mode 0 # There are also several variables to help make your bot less noticeable. # They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set # them to values you'd like. #### IRC MODULE #### # This module provides basic IRC support for your bot. You have to # load this if you want your bot to come on IRC. The server and channels # modules must be loaded for this module to function. loadmodule irc # Set this to 1 if you want to bounce all server bans. set bounce-bans 0 # Set this to 1 if you want to bounce all server exemptions (+e modes). # This is disabled if use-exempts is disabled. set bounce-exempts 0 # Set this to 1 if you want to bounce all server invitations (+I modes). # This is disabled if use-invites is disabled. set bounce-invites 0 # Set this to 1 if you want to bounce all server modes. set bounce-modes 0 # Set here the maximum number of bans you want the bot to set on a channel. # Eggdrop will not place any more bans if this limit is reached. Undernet # currently allows 45 bans, IRCnet allows 30, EFnet allows 100, and DALnet # allows 100. set max-bans 30 # Set here the maximum number of exempts you want Eggdrop to set on a channel. # Eggdrop will not place any more exempts if this limit is reached. set max-exempts 20 # Set here the maximum number of invites you want Eggdrop to set on a channel. # Eggdrop will not place any more invites if this limit is reached. set max-invites 20 # There is a global limit for +b/+e/+I modes. This limit should be set to # the same value as max-bans for networks that do not support +e/+I. set max-modes 30 # The following settings should be left commented unless the default values # are being overridden. By default, exempts and invites are on for EFnet and # IRCnet, but off for all other large networks. This behavior can be modified # with the following 2 flags. If your network doesn't support +e/+I modes then # you will be unable to use these features. # # Do you want to enable exempts (+e modes)? #set use-exempts 0 # Do you want to enable invites (+I modes)? #set use-invites 0 # Set this to 1 if you want the bot to kick for control character/ctcp # avalanches to a channel. Remember that if it does, it won't ban them. # This can start kick floods. set kick-fun 0 # Set this to 1 if you want the bot to ban for control character/ctcp # avalanches to a channel. This can prevent kick floods, but it also can # fill the banlist. set ban-fun 0 # If you want people to be able to add themselves to the bot's userlist # with the default userflags (defined above in the config file) via the # 'hello' msg command, set this to 1. set learn-users 0 # Set here the time (in seconds) to wait for someone to return from a netsplit # (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its # nick delay stops after 30 minutes. set wait-split 600 # Set here the time (in seconds) that someone must have been off-channel # before re-displaying their info line. set wait-info 180 # Set this to the maximum number of bytes to send in the arguments # of modes sent to the server. Most servers default this to 200. set mode-buf-length 200 # Many IRCops find bots by seeing if they reply to 'hello' in a msg. # You can change this to another word by un-commenting the following # two lines and changing "myword" to the word wish to use instead of # 'hello'. It must be a single word. #unbind msg - hello *msg:hello #bind msg - myword *msg:hello # Many takeover attempts occur due to lame users blindly /msg ident'ing to # the bot and attempting to guess passwords. We now unbind this command by # default to discourage them. You can enable these commands by commenting the # following two lines. unbind msg - ident *msg:ident unbind msg - addhost *msg:addhost # Some IRC servers are using some non-standard op-like channel prefixes/modes. # Define them here so the bot can recognize them. Just "@" should be fine for # most networks. Un-comment the second line for some UnrealIRCds. set opchars "@" #set opchars "@&~" # If you are so lame you want the bot to display peoples info lines, even # when you are too lazy to add their chanrecs to a channel, set this to 1. # *NOTE* This means *every* user with an info line will have their info # line displayed on EVERY channel they join (provided they have been gone # longer than wait-info). set no-chanrec-info 0 ### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type 1) ### # Attention: Use these settings *only* if you set 'net-type' to 1! # At the moment, the current IRCnet IRCd version (2.10) doesn't support the # mixing of b, o and v modes with e and I modes. This might be changed in the # future, so use 1 at the moment for this setting. set prevent-mixing 1 ### IRC MODULE - OTHER NETWORKS (net-type 5) ### # Attention: Use these settings *only* if you set 'net-type' to 5! # If your network supports more users per kick command then 1, you can # change this behavior here. Set this to the number of users to kick at # once, or set this to 0 for all at once. #set kick-method 1 # Some networks allow you to stack lots of channel modes into one line. # They're all guaranteed to support at least 3, so that's the default. # If you know your network supports more, you may want to adjust this. # This setting is limited to 6, although if you want to use a higher value, # you can modify this by changing the value of MODES_PER_LINE_MAX in # src/chan.h and recompiling the bot. #set modes-per-line 3 # Some networks don't include the +l limit and +k or -k key modes # in the modes-per-line (see above) limitation. Set include-lk to 0 for # these networks. #set include-lk 1 # Set this to 1 if your network uses IRCu2.10.01 specific /who requests. # Eggdrop can, therefore, ask only for exactly what's needed. #set use-354 0 # If your network doesn't use rfc 1459 compliant string matching routines, # set this to 0. #set rfc-compliant 0 #### TRANSFER MODULE #### # The transfer module provides DCC SEND/GET support and userfile transfer # support for userfile sharing. Un-comment the next line to load it if you # need this functionality. #loadmodule transfer # Set here the maximum number of simultaneous downloads to allow for # each user. set max-dloads 3 # Set here the block size for dcc transfers. ircII uses 512 bytes, # but admits that it may be too small. 1024 is standard these days. # 0 is turbo-dcc (recommended). set dcc-block 0 # Enable this setting if you want to copy files into the /tmp directory # before sending them. This is useful on most systems for file stability, # but if your directories are NFS mounted, it's a pain, and you'll want # to set this to 0. If you are low on disk space, you may also want to # set this to 0. set copy-to-tmp 1 # Set here the time (in seconds) to wait before an inactive transfer times out. set xfer-timeout 30 #### SHARE MODULE #### # This module provides userfile sharing support between two directly # linked bots. The transfer and channels modules are required for this # module to correctly function. Un-comment the following line to load # the share module. #loadmodule share # Settings in this section must be un-commented before setting. # When two bots get disconnected, this setting allows them to create a # resync buffer which saves all changes done to the userfile during # the disconnect. When they reconnect, they will not have to transfer # the complete user file, but, instead, just send the resync buffer. # # NOTE: This has been known to cause loss of channel flags and other # problems. Using this setting is not recommended. #set allow-resync 0 # This setting specifies how long to hold another bots resync data # before flushing it. #set resync-time 900 # When sharing user lists, DON'T ACCEPT global flag changes from other bots? # NOTE: The bot will still send changes made on the bot, it just won't accept # any global flag changes from other bots. This overrides the private-globals # setting (below). #set private-global 0 # When sharing user lists, if private-global isn't set, which global flag # changes from other bots should be ignored? #set private-globals "mnot" # When sharing user lists, don't accept ANY userfile changes from other # bots? Paranoid people should use this feature on their hub bot. This # will force all userlist changes to be made via the hub. #set private-user 0 # This setting makes the bot discard its own bot records in favor of # the ones sent by the hub. # NOTE: No passwords or botflags are shared, only ports and # address are added to sharing procedure. This only works with hubs that # are v1.5.1 or higher. #set override-bots 0 #### COMPRESS MODULE #### # This module provides provides support for file compression. This allows the # bot to transfer compressed user files and therefore save a significant amount # of bandwidth. The share module must be loaded to load this module. Un-comment # the following line to the compress module. #loadmodule compress # Allow compressed sending of user files? The user files are compressed with # the compression level defined in `compress-level'. set share-compressed 1 # This is the default compression level used. These levels are the same as # those used by GNU gzip. #set compress-level 9 #### FILESYSTEM MODULE #### # This module provides an area within the bot where users can store and # manage files. With this module, the bot is usable as a file server. The # transfer module is required for this module to function. Un-comment # the following line to load the filesys module. #loadmodule filesys # Set here the 'root' directory for the file system. set files-path "/home/mydir/filesys" # If you want to allow uploads, set this to the directory uploads # should be put into. Set this to "" if you don't want people to # upload files to your bot. set incoming-path "/home/mydir/filesys/incoming" # If you don't want to have a central incoming directory, but instead # want uploads to go to the current directory that a user is in, set # this setting to 1. set upload-to-pwd 0 # Eggdrop creates a '.filedb' file in each subdirectory of your file area # to keep track of its own file system information. If you can't do that (for # example, if the dcc path isn't owned by you, or you just don't want it to do # that) specify a path here where you'd like all of the database files to be # stored instead. set filedb-path "" # Set here the maximum number of people that can be in the file area at once. # Setting this to 0 makes it effectively infinite. set max-file-users 20 # Set here the maximum allowable file size that will be received (in KB). # Setting this to 0 makes it effectively infinite. set max-filesize 1024 #### NOTES MODULE #### # This module provides support for storing of notes for users from each other. # Note sending between currently online users is supported in the core, this is # only for storing the notes for later retrieval. loadmodule notes # Set here the filename where private notes between users are stored. set notefile "LamestBot.notes" # Set here the maximum number of notes to allow to be stored for each user # (to prevent flooding). set max-notes 50 # Set here how long (in days) to store notes before expiring them. set note-life 60 # Set this to 1 if you want to allow users to specify a forwarding address # for forwarding notes to another account on another bot. set allow-fwd 0 # Set this to 1 if you want the bot to let people know hourly if they have # any notes. set notify-users 0 # Set this to 1 if you want the bot to let people know on join if they have # any notes. set notify-onjoin 1 # Comment out this next line. Otherwise, your bot won't start. die "You didn't edit your config file completely like you were told, did you?" #### CONSOLE MODULE #### # This module provides storage of console settings when you exit the # bot or type .store on the partyline. loadmodule console # Save users console settings automatically? Otherwise, they have # to use the .store command. set console-autosave 1 # If a user doesn't have any console settings saved, which channel # do you want them automatically put on? set force-channel 0 # Enable this setting if a user's global info line should be displayed # when they join a botnet channel. set info-party 0 #### WOOBIE MODULE #### # This is for demonstrative purposes only. If you are looking for starting # point in writing modules, woobie is the right thing. #loadmodule woobie #### SEEN MODULE #### # This module provides very basic seen commands via msg, on channel or via dcc. # This module works only for users in the bot's userlist. If you are looking for # a better and more advanced seen module, try the gseen module by G'Quann. You # can find it at http://www.kreativrauschen.com/gseen.mod/. #loadmodule seen #### ASSOC MODULE #### # This module provides assoc support, i.e. naming channels on the botnet. # You can load it by un-commenting the following line. #loadmodule assoc #### WIRE MODULE #### # This module provides all the standard .wire commands via dcc. It is an # encrypted partyline communication tool, compatible with wire.tcl. An # encryption module must be loaded to use this module. Un-comment the # following line to load the wire module. #loadmodule wire #### UPTIME MODULE #### # This module reports uptime statistics to http://uptime.eggheads.org. # Go look and see what your uptime is! It takes about 9 hours to show up, # so if your bot isn't listed, try again later. The server module must be # loaded for this module to function. # # Information sent to the server includes the bot's uptime, botnet-nick, # server, version, and IP address. This information is stored in a temporary # logfile for debugging purposes only. The only publicly available information # will be the bot's botnet-nick, version and uptime. If you do not wish for this # information to be sent, comment out the following line. loadmodule uptime ##### SCRIPTS ##### # This is a good place to load scripts to use with your bot. # This line loads script.tcl from the scripts directory inside your Eggdrop's # directory. All scripts should be put there, although you can place them where # you like as long as you can supply a fully qualified path to them. # # source scripts/script.tcl source scripts/alltools.tcl source scripts/action.fix.tcl # This script enhances Eggdrop's built-in dcc '.whois' command to allow all # users to '.whois' their own handle. source scripts/dccwhois.tcl # This script provides many useful informational functions, like setting # users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add # extra entries. source scripts/userinfo.tcl loadhelp userinfo.help # Use this script for Tcl and Eggdrop backwards compatibility. # NOTE: This can also cause problems with some newer scripts. source scripts/compat.tcl # A few IRC networks (EFnet and Undernet) have added some simple checks to # prevent drones from connecting to the IRC network. While these checks are # fairly trivial, they will prevent your Eggdrop from automatically # connecting. In an effort to work-around these, we have developed a couple of # TCL scripts to automate the process.