Untitled
Posted by Anonymous on Tue 13th Dec 2011 03:42
raw | new post

 * Messages for package sys-fs/lvm2-2.02.73-r1:

 * Warning, we no longer overwrite /sbin/lvm and /sbin/dmsetup with
 * their static versions. If you need the static binaries,
 * you must append .static the filename!
 * USE flag nocman is deprecated and replaced
 * with the cman USE flag.
 *
 * USE flags clvm and cman are masked
 * by default and need to be unmasked to use them
 *
 * If you are using genkernel and root-on-LVM, rebuild the initramfs.
 * lvm volumes are no longer automatically created for
 * baselayout-2 users. If you are using baselayout-2, be sure to
 * run: # rc-update add lvm boot
 * Do NOT add it if you are using baselayout-1 still.

 * Messages for package app-portage/portage-utils-0.3.1:

 * /etc/portage/postsync.d/q-reinitialize has been installed for convenience
 * If you wish for it to be automatically run at the end of every --sync:
 *    # chmod +x /etc/portage/postsync.d/q-reinitialize
 * Normally this should only take a few seconds to run but file systems
 * such as ext3 can take a lot longer.  To disable, simply do:
 *    # chmod -x /etc/portage/postsync.d/q-reinitialize

 * Messages for package media-libs/alsa-lib-1.0.24.1:

 * Please try in-kernel ALSA drivers instead of the alsa-driver ebuild.
 * If alsa-driver works for you where a *recent* kernel does not, we want
 * to know about this. Our e-mail address is alsa-bugs@gentoo.org
 * However, if you notice no sound output or instability, please try to
 * upgrade your kernel to a newer version first.

 * Messages for package media-sound/alsa-utils-1.0.24.2-r1:

 * To take advantage of the init script, and automate the process of
 * saving and restoring sound-card mixer levels you should
 * add alsasound to the boot runlevel. You can do this as
 * root like so:
 *      # rc-update add alsasound boot
 * The script will load ALSA modules, if you choose to use a modular
 * configuration. The Gentoo ALSA developers recommend you to build
 * your audio drivers into the kernel unless the device is hotpluggable
 * or you need to supply specific options (such as model= to HD Audio).
 * Automated unloading of ALSA modules is deprecated and unsupported.
 * Should you choose to use it, bug reports will not be accepted.

 * Messages for package sys-fs/udev-164-r2:

 *   CONFIG_IDE:         should not be set. But it is.
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.
 *
 * udev-164 does not support Linux kernel before version 2.6.25!
 * For a reliable udev, use at least kernel 2.6.27
 *
 * Updating persistent-net rules file
 *
 * If after the udev update removable devices or CD/DVD drives
 * stop working, try re-emerging HAL before filling a bug report
 *
 * persistent-net does assigning fixed names to network devices.
 * If you have problems with the persistent-net rules,
 * just delete the rules file
 *      rm /etc/udev/rules.d/70-persistent-net.rules
 * and then reboot.
 *
 * This may however number your devices in a different way than they are now.
 *
 * If you build an initramfs including udev, then please
 * make sure that the /sbin/udevadm binary gets included,
 * and your scripts changed to use it,as it replaces the
 * old helper apps udevinfo, udevtrigger, ...
 *
 * mount options for directory /dev are no longer
 * set in /etc/udev/udev.conf, but in /etc/fstab
 * as for other directories.
 *
 * If you use /dev/md/*, /dev/loop/* or /dev/rd/*,
 * then please migrate over to using the device names
 * /dev/md*, /dev/loop* and /dev/ram*.
 * The devfs-compat rules have been removed.
 * For reference see Bug #269359.
 *
 * Rules for /dev/hd* devices have been removed
 * Please migrate to libata.
 *
 * For more information on udev on Gentoo, writing udev rules, and
 *          fixing known issues visit:
 *          http://www.gentoo.org/doc/en/udev-guide.xml

 * Messages for package gnome-base/orbit-2.14.19-r1:

 *   We've already been run in this tree; you should
 *   avoid this if possible (perhaps by filing a bug)

 * Messages for package x11-libs/gdk-pixbuf-2.24.0-r1:

 *   We've already been run in this tree; you should
 *   avoid this if possible (perhaps by filing a bug)

 * Messages for package x11-misc/xdg-utils-1.1.0_rc1_p20111003:

 * Install x11-libs/gtk+:2 for the gtk-update-icon-cache command.

 * Messages for package media-libs/fontconfig-2.8.0-r1:

 * Please make fontconfig configuration changes using `eselect fontconfig`
 * Any changes made to /etc/fonts/fonts.conf will be overwritten.
 *
 * If you need to reset your configuration to upstream defaults, delete
 * the directory /etc/fonts/conf.d/ and re-emerge fontconfig.

 * Messages for package media-fonts/dejavu-2.32:

 * The following fontconfig configuration files have been installed:
 *
 *   20-unhint-small-dejavu-sans-mono.conf
 *   20-unhint-small-dejavu-sans.conf
 *   20-unhint-small-dejavu-serif.conf
 *   57-dejavu-sans-mono.conf
 *   57-dejavu-sans.conf
 *   57-dejavu-serif.conf
 *
 * Use `eselect fontconfig` to enable/disable them.

 * Messages for package app-text/poppler-0.16.7:

 * After upgrading app-text/poppler you may need to reinstall packages
 * linking to it. If you're not a portage-2.2_rc user, you're advised
 * to run revdep-rebuild

 * Messages for package media-fonts/urw-fonts-2.4.9:

 * If you upgraded from urw-fonts-2.1-r2 some fonts will look a bit
 * different. Take a look at bug #208990 if interested.

 * Messages for package net-print/cups-1.4.8-r1:

 * If you plan to use USB printers you should enable the USB_PRINTER
 * support in your kernel.
 * Please enable it:
 *     CONFIG_USB_PRINTER=y
 * in /usr/src/linux/.config or
 *     Device Drivers --->
 *         USB support  --->
 *             [*] USB Printer support
 * For information about installing a printer and general cups setup
 * take a look at: http://www.gentoo.org/doc/en/printing-howto.xml

 * Messages for package app-text/ghostscript-gpl-9.04-r4:

 *   We've already been run in this tree; you should
 *   avoid this if possible (perhaps by filing a bug)

 * Messages for package x11-libs/gtk+-2.24.5-r1:

 * Please install app-text/evince for print preview functionality.
 * Alternatively, check "gtk-print-preview-command" documentation and
 * add it to your gtkrc.

 * Messages for package gnome-base/librsvg-2.34.1-r1:

 *   We've already been run in this tree; you should
 *   avoid this if possible (perhaps by filing a bug)

 * Messages for package x11-libs/gtk+-3.0.12-r1:

 * Please install app-text/evince for print preview functionality.
 * Alternatively, check "gtk-print-preview-command" documentation and
 * add it to your settings.ini file.

 * Messages for package sys-auth/polkit-0.102:

 * If you don't use GDM or KDM for logging in,
 * you must start your desktop environment (DE) as follows:
 *      ck-launch-session $STARTGUI
 * Where $STARTGUI is a DE-starting command such as 'gnome-session'.
 * You should add this to your ~/.xinitrc if you use startx.

 * Messages for package sys-auth/consolekit-0.4.5-r1:

 * You need to restart ConsoleKit to get the new features.
 * This can be done with /etc/init.d/consolekit restart
 * but make sure you do this and then restart your session
 * otherwise you will get access denied for certain actions

 * Messages for package sys-auth/pambase-20101024:

 * Starting from version 20080801, pambase optionally enables
 * SHA512-hashed passwords. For this to work, you need sys-libs/pam-1.0.1
 * built against sys-libs/glibc-2.7 or later.
 * If you don't have support for this, it will automatically fallback
 * to MD5-hashed passwords, just like before.
 *
 * Please note that the change only affects the newly-changed passwords
 * and that SHA512-hashed passwords will not work on earlier versions
 * of glibc or Linux-PAM.

 * Messages for package sys-fs/udisks-1.0.4-r1:

 *   CONFIG_IDE:         should not be set. But it is.
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.

 * Messages for package gnome-base/libgnome-keyring-2.32.0:

 *   We've already been run in this tree; you should
 *   avoid this if possible (perhaps by filing a bug)

 * Messages for package net-libs/libsoup-gnome-2.34.3:

 *   We've already been run in this tree; you should
 *   avoid this if possible (perhaps by filing a bug)

 * Messages for package gnome-base/gvfs-1.6.7-r1:

 * In order to use the new gvfs services, please reload dbus configuration
 * You may need to log out and log back in for some changes to take effect
>>> Auto-cleaning packages...

>>> No outdated packages were found on your system.

 * Regenerating GNU info directory index...
 * Processed 105 info files.

 * IMPORTANT: config file '/etc/pam.d/system-login' needs updating.
 * See the CONFIGURATION FILES section of the emerge
 * man page to learn how to update config files.

 * IMPORTANT: 2 news items need reading for repository 'gentoo'.
 * Use eselect news to read news items.